These products are not advisable for unders 14 years old unless supervised by an adult.
Assembly Notes: If you bought the limber too, after gluing the wheels onto the frame of the limber. don't immediately glue the spars to the limber, because you will need them to be at the right angle. It is much easier to secure the spars to the flanks of the elephant if you first pin-drill small holes in the flanks of the elephant, as shown above, and glue in a short length of florists wire or similar. This will enable you simply to hook the bracket on the spar over the length of wire and secure it with a blob of glue. You will need to support the crossbar at the front of the limber with any old object of the right height. Then, one at a time, drop the hooks at the back ends of the spars into the two rings on the front of the limber and secure with a blob of glue.
|Product Code||LA23 HEAVEY ARTILLERY DRAUGHT ELEPHANT|